2-in-1 steel + aluminium dent repair station

2-in-1 station: 5,600 A steel spotter and capacitor-discharge welding of M4 to M6 aluminium studs.

5,600 A
Maximum current: 5 kW
Power: 140,000 µF
Capacity: 220 V
Power supply

Prices and stock for distributors only

Distributor area

Bodyshop or private customer?

This product is available from Humming distributors. Find the one nearest to you.

Find a distributor

Request a quote Request a call back Compare PDF

Overview

Dent repair station that handles both steel and aluminium bodywork, with no removal or stripping. It combines an ergonomic gun for steel with a dedicated aluminium gun. On the aluminium side, capacitor discharge (140,000 µF) welds M4, M5 and M6 studs on AlSi and AlMg alloy panels, with voltage adjustable from 50 to 90 V and stud presence detection. On the steel side, 80-level power and adjustable weld time, in manual or automatic mode, with digital display.

Key features

Steel and aluminium on a single station
Ergonomic steel gun + dedicated aluminium gun
140,000 µF capacitor discharge for M4, M5, M6 studs
Voltage adjustable from 50 to 90 V, stud presence detection
80-level power, weld time adjustable from 0.01 to 3.00
Full equipment on tool trolley

How to use

Steel dent repair with spot welds
Welding M4 to M6 aluminium studs on AlSi and AlMg alloys
Pulling with washers, stars, OT rings and wiggle wires
Heat shrinking and carbon electrode heating
Glue pulling

Technical specifications

Supply voltage	220 V – 50/60 Hz
Firing mode	Manual / automatic
Continuous power	5 kW
Max. welding current	5,600 A
Panel thickness	0.4 to 1.2 mm
Current adjustment	Stepless
Open-circuit voltage	10 V
Power adjustment	80 levels
Weld time adjustment	0.01 to 3.00
Capacitance (aluminium welding)	140,000 µF
Adjustable voltage (aluminium)	50 to 90 V
Aluminium studs	M4, M5, M6
Display	Digital
Panels worked	Steel and aluminium
Format	On tool trolley